Maker Faire: Detroit – Milwaukee Makerspace https://milwaukeemakerspace.org Conceive, Collaborate, Create Sat, 03 Jun 2017 13:52:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 Spindles of Wood https://milwaukeemakerspace.org/2017/06/spindles-of-wood/ https://milwaukeemakerspace.org/2017/06/spindles-of-wood/#respond Sun, 04 Jun 2017 14:00:05 +0000 http://milwaukeemakerspace.org/?p=9459

“Spindles of Wood” is not the name of the latest album from some obscure Icelandic emo band! Instead they are actually the front wheel spindles for our No-weld PPPRS vehicle. (You probably remember the frame from last time.)

While most teams in the Power Racing Series just buy pre-made spindles and weld them in place, our “No-weld” spindles were built using wood, glue some staples/screws, and use some 5/8″ bolts to attach to the car, and for the wheels to attach to.

We’ve still got to get the whole steering thing worked out, but we’re on our way! (Things are moving a bit slower than we had hoped, so we might debut this thing at Detroit in July instead of Kansas City in June, but we’ll see how it goes.)

]]>
https://milwaukeemakerspace.org/2017/06/spindles-of-wood/feed/ 0
Power Wheels Racing https://milwaukeemakerspace.org/2016/08/power-wheels-racing/ https://milwaukeemakerspace.org/2016/08/power-wheels-racing/#comments Sat, 20 Aug 2016 12:00:20 +0000 http://milwaukeemakerspace.org/?p=9114 Race HeadLast month the Milwaukee Makerspace Racing Team packed up the cars and road tripped to2 images vertical Maker Faire Detroit.  After long nights working at the space until 4am for the week before the drive Ed, Kathy, Pete, Andy, Vishal, and too many others to mention got 3 cars race ready.  The Bluth Stair Car, Super Tux Kart, and Hippie Rose made the journey to Detroit without damage are and were a blast to drive.

 

Our 3 cars raced with 34 others in the biggest Power Racing Series event to date on the biggest track ever made.  It was great to see all the hard work paying off as the builders of the cars became the happy drivers of the cars. Both days of races were streamed live by our friends at Make Magazine to Twitch.tv where they can still be watched. Be sure to check out the race at Maker Faire Milwaukee September 24th-25th.

 

Check out the race from day one at the link below:

https://player.twitch.tv/?volume=1&video=v80805800&time=04h50m54s

]]>
https://milwaukeemakerspace.org/2016/08/power-wheels-racing/feed/ 1
Power Racing Series – Detroit https://milwaukeemakerspace.org/2012/08/power-racing-series-detroit/ https://milwaukeemakerspace.org/2012/08/power-racing-series-detroit/#comments Wed, 01 Aug 2012 18:00:47 +0000 http://milwaukeemakerspace.org/?p=3975 Power Racing Series

Our story starts with Tom’s build of Red Lotus because he wanted to have a new car for the race at Maker Faire Detroit. Being a master craftsman, he was able to build the car in just one weekend! (Well, mostly.)

My part of the story is that I’ve never been to a real Maker Faire before, and never drove a Power Wheels car (that part is important later) so when I got to the Henry Ford Museum I stopped by the Power Racing Series track so see how the crew from Milwaukee Makerspace was doing. Shortly after that someone asked me if I could drive on Sunday. I said “sure thing!” because I’m a team player and like to help out. If only I’d known what I was in for…

PPPRS - Jason

Saturday’s races included the drag race, moxie race, and some other things. I missed some of it, but ended up helping as a track marshal for a bit. jason g. drove Red Lotus in the drag race and took 3rd place! jason still isn’t sure how that happened, but I think he’s just being modest.

Our other car (Big Jakenstein) won in the first drag race but got pulled later because of an accident due to a stuck throttle. (After some repairs we did run Big Jakenstein after all the races were completed at it was timed doing the fastest lap all weekend. That thing is a beast!)

PPPRS - Sean

On Sunday it was time for the endurance race. This is a 75 minute race with mandatory driver changes every 15 minutes. Sean started and I alternated driving with him. I should note that the first time I ever drove any Power Wheels car was about an hour before the race… So how did we do?

PPPRS - Pete

We were plagued by the chain breaking within the first 5 minutes of the endurance race which required about 10 minutes worth of repairs, which really put us back in laps. The front wheels fell off (or nearly fell off—there is still some debate about the exact degree the wheels fell off) about 1/3 into the race, but we got new wheels from Pumping Station: One, which were larger than the rear wheels, but lasted the rest of the race. Near the end of the race the throttle got a little wiggly, but we were able to complete the entire race. Besides the chain and wheel issues, Red Lotus performed quite well (in my opinion) and we managed to place 7th. I feel like if we hadn’t needed to sit out so many laps in the beginning for repairs we could have done a bit better, but major kudos to Tom for his quick repair job!

Power Racing Series - Chicago

I know you’re saying “Damn! I missed it!” But hey race fans, don’t worry… we still have the finale of the 2012 Power Racing season coming up… This Saturday night, August 4th, 2012 at Evanston Mini Maker Faire, we’ll see if Red Lotus can kick it into high gear and show ’em Milwaukee knows how to build (and drive) a souped-up kid’s toy car.

(Oh! Be sure to check out the PPPRS video too!)

]]>
https://milwaukeemakerspace.org/2012/08/power-racing-series-detroit/feed/ 6
Maker Faire Detroit is (almost) here! https://milwaukeemakerspace.org/2012/07/maker-faire-detroit-is-here/ https://milwaukeemakerspace.org/2012/07/maker-faire-detroit-is-here/#respond Tue, 24 Jul 2012 14:17:45 +0000 http://milwaukeemakerspace.org/?p=3950 Maker Faire Detroit

We’re just a few days away from Maker Faire Detroit, which is happening July 28th-29th, 2012 at the Henry Ford Museum over in Michigan. Since we’re in Wisconsin, it’s practically next door…

So yeah, there will be a bunch of Milwaukee Makers in attendance, and as for Power Wheels, yeah, we do that too!

I’m excited to the point of no return this week, as this will be my first official Maker Faire, and I’ll probably overdose on Maker-related things and activities. I’ll probably take too many photos, and talk to too many people, but that’s OK, as I can’t imagine doing anything else. I hope to see you there!

]]>
https://milwaukeemakerspace.org/2012/07/maker-faire-detroit-is-here/feed/ 0
Milwaukee Makespace will participate in Power Racing Series at Maker Faire Detroit https://milwaukeemakerspace.org/2010/03/milwaukee-makespace-will-participate-in-power-racing-series-at-maker-faire-detroit/ https://milwaukeemakerspace.org/2010/03/milwaukee-makespace-will-participate-in-power-racing-series-at-maker-faire-detroit/#respond Wed, 31 Mar 2010 06:04:11 +0000 http://mm.bytedev.info/?p=1088 Milwaukee Makespace will participate in the Power Racing Series at Maker Faire Detroit. At the meeting tonight we discussed the Power Racing Series. Of all the ideas we’ve dicussed for our next group project, this idea seemed to generate the most dicussion.

So, we’re in!!

I’ve attached the rules as a PDF and the website is here: http://www.powerracingseries.org/

Here is the link the Maker Faire: Detroit: http://blog.makezine.com/archive/2009/12/maker_faire_detroit_2010.html

The basic idea is to modify and race a Power Wheels children’s electric vehicle. Watching adults race around on tiny vehicles should be a riot. Modifing our Power Wheel vehicles should be even more fun!

Attachment Size
pppwrs-packet.pdf 3.58 MB
]]>
https://milwaukeemakerspace.org/2010/03/milwaukee-makespace-will-participate-in-power-racing-series-at-maker-faire-detroit/feed/ 0