In the last 2 weeks, we have begun building our prototype, and we are ready to start production of the remaining hexes.

We had to start out with cutting down a 2x6x10 board into 6 pieces and joining and plaining them to all be the same thickness

Greg Waldo then taught us how to use a table saw to cut the grooves into the top rather than using a router.  This made things much faster and accurate.   

We tried to use pocket hole screws, but they did not work very well.

In the end, we opted for a good old fashion glue up and finish nailing.

The goal for this project is to be able to have it finished in time for Milwaukee Makerfaire!  Stay tuned for more updates.  We are always looking for more people to join us, every Monday!  Upcoming Mondays we will be meeting at Norwich to use the Norwich woodshop!

The Casting Area is running another Iron Pour.

This Event will be open to participants, Members and Non-Members.

Please contact Dave directly if you are a Visiting Artist/Non-member and need studio time to make your own artist mold. All non-members must sign the “Iron Casting Waiver” to participate.

Studio Time is to be scheduled in advance. If you plan on bringing a mold or making a mold all weights must be estimated and metal must be broken by said attendee. If you are unable to break iron due to medical reasons please reach out to Dave.  

Resin-bonded sand molds are weighed before they get to the pour floor. 

Artist Tile and Doodle Bowl Workshops:

Saturday 03-23-24 @ 12:30-3:30
Sunday 04-07-24 @ 12:30-3:30
Saturday 04-20-24 @ 12:30-3:30

Saturday April 27th 
We are planning to have the Safety Meeting at noon. If you plan on participating on the pour floor, show up to the safety meeting and sign the waiver, it’s required. Observation will be available from the north side of the pour floor. Observation will only be accessible from Norwich Ave. The proposed Schedule is the following:

8:00am Pour floor setup (leveling and placing molds)
9:00am Scratch blocks & Doodle Bowls available for sale.

10:30am burn-in (preheat furnace with immersion burner forced air and natural gas) 

12:00 safety meeting Immediately after the safety meeting, we go on blast.

*Going on Blast – removing immersion burner and attaching Blower to the furnace and entirely running of forced air and Coke Start charging iron/coke as it settles

1:00pm Should have first tap, Tapping every 13 minutes. 

4:00pm Drop bottom when all molds are filled – brief clean up.

Sunday, April 28th 

10:00am Clean-up and devesting molds:

Clean-up is required if you have an artist mold on the pour floor. All Artist Tiles/Doodle Bowls will be out on display for pickup. No additional payment is required for these items. For Artist Molds, gating and pour cups may be cut off and thrown in the iron pile.

Please weigh your castings and provide payment in the donation bin or via Wild Aprocot bit.ly/3wKtOcS Please Refer to the rates section for pricing https://wiki.milwaukeemakerspace.org/areas/casting/rates

Contact Dave for more information at dave@davidmarnold.com or via cell phone 4142150499

After more than a decade of monthly payments, the Milwaukee Makerspace paid off the remaining balance on its land contract on the Lenox building at Tuesday’s Board meeting. Congrats to us! And thanks to the investors who had faith in MMS! 

Hats off to all who participated in Space Improvement Day today. Here are a few glimpses from Lenox. Equal fun was, no-doubt, had at Norwich. We hope to see you for the next SID at the end of March.

The next Artist Tile & Doodle Bowl Workshop is Devember 17th at 12:30pm, contact Dave Arnold for more information on upcoming

Introduction:

As the aroma of Thanksgiving dinner still lingers in the air and the first ornaments find their place on the tree, it’s that magical time of year again when we come together to spread holiday cheer through the community. While some brave the chaos of Black Friday sales to secure the hottest toys of the season, here at Milwaukee Makerspace, we have a different tradition. It’s our annual Makes-Giving event, a heartwarming celebration of crafting, community, and the joy of giving.

Making Memories on Black Friday:

While many were out battling the crowds and long lines, our makers and volunteers gathered on Black Friday for a truly special occasion. Makes-Giving is an event that warms our hearts just as much as the hot cocoa warms our hands. It’s a day where we channel our creative energy into crafting thoughtful and heartfelt gifts for loved ones.

The Spirit of Makes-Giving:

At Makes-Giving, the spirit of giving is at its brightest. Members of Milwaukee Makerspace volunteer their time, expertise, and creativity to help families in the community create Christmas gifts from the heart. It’s a tradition that embodies the true essence of the holiday season – generosity, togetherness, and the joy of making someone smile.

Crafting with a Purpose:

Our annual event isn’t just about making crafts; it’s about making memories. Families and individuals join us to craft one-of-a-kind presents that carry their love and personal touch. From handcrafted ornaments to custom-made keepsakes, the possibilities are as endless as the smiles they bring. Makes-Giving isn’t just a crafting event; it’s an opportunity to create cherished memories that will last a lifetime.

Mark Your Calendar for Next Year:

If you missed out on Makes-Giving this year, don’t worry; there’s always room for more holiday magic. Be sure to mark your calendar for next Black Friday and join us for a day filled with creativity, community, and the joy of giving. It’s a chance to slow down amidst the holiday hustle and bustle, savor the simple pleasure of crafting, and make a meaningful impact on the lives of those you love.

Conclusion:

As we hang up our crafting tools and put away the glitter for another year, the spirit of Makes-Giving lingers on in our hearts. It’s a reminder that the holiday season is about more than just presents; it’s about the love, connection, and joy we share with one another. So here’s to another successful Makes-Giving, and to many more in the years to come. May your holiday season be filled with warmth, creativity, and the joy of giving!