Are you a boat or home owner?  Do you wish paying your bills was more fun?  Do you have stacks of cash sitting around just taking up space?  Well this is the project for you!  Over the next month we will be designing version 2 of the Rain Maker.  It’s a tool that you load with cash and then launch at about the speed most of my project eat cash lately.  Version 2 you ask?  That’s right most of the longer projects we model in class take me several attempts to get right.  Here is a link so you can see it in action. 

https://www.instagram.com/p/CYP6pMlIizE/

The first draft lets me work out the ideas and see if I can get a working prototype.   In this case I knew I wanted to try over molding like our favorite tool company here in Milwaukee and I was not sure if my cash accelerator device would work.  About a hundred hours of printing later I can tell you it does and I learned a lot of do’s and don’t when over molding on 3d printed parts.  I do really like the feel of the urathane rubber in my hand and it is so much fun to see money shooting our the front of the tool.  This is going to be a fun one so join us Mondays @ 7pm or watch the series on YouTube.

Julie and Carl of Scoops Ice Cream & Candies of Kenosha, approached new Makerspace member, Brandon Minga, with their project. They were given recommendations from other projects he’s done in the are including Mike’s Chicken & Donuts and the Modern Apothecary. Scoops was looking to enhance and draw more attention to their new location with a large exterior sign. Going through the concept and design process Minga quickly decided that the sign design was also going to become their new logo. Once the final design was rendered he quickly learned how to CNC a template to hand plasma trace the design out of sheet metal. The middle of the sign was also hand cut, roll bent and broke to match the bubbly ice cream cone shape. With a little help from friends a the Makerspace, he ground down welds and drilled 44 holes for the light bulbs. After all the holes were drilled Minga fit the sign with sockets, wired up the sockets and tested the electrical. Working with Prodigy Sign in Kenosha he also coordinated the hanging of the sign.

Any project starts with a sketch.

Nothing wrong with learning a little g-code.

 

A post shared by Mingadigm (@brandonminga) on May 2, 2017 at 12:47pm PDT

Took that g-code and used the handmade CNC router to cut out a template (note to self, don’t use OSB for plasma templates).

Traced template with hand plasma cutter.

Hand cut, roll bent, metal break and tack welded the bottom shell.

Hand cut and used the break to bend my own c-channel for the stabilizing guts of the sign.

A little help from my friends!

 

A post shared by Mingadigm (@brandonminga) on Mar 31, 2017 at 3:33pm PDT

A little custom install and wiring….and we have lights!

Can’t forget the paint! Primed inside and out, the sign got coated with some retro color.

Installation day was very windy, they called two crews in to stabilize the sign as they anchored it to the building.

This is a Mingadigm.com by Brandon Minga

This project was done at the Milwaukee Makerspace,  thank you, gang!

I’m working on a project that requires two power strips to be turned on in a sequence. The first power strip powers 6 HDMI displays, and the second one powers 6 computers. The displays have to be on before the computers so they sync properly and get the correct resolution. Since I can’t rely on a person to do this properly, automation is the answer.

My first thought was to use something like a PowerSwitch Tail with a microcontroller to trigger it. (There’s also a cheaper kit version available.) The issue with this solution is that I’d need a microcontroller, and a power supply for the microcontroller, which are more parts, and more points of failure, and take up more space. I also considered using a cheap relay module, but ultimately I was overly complicating the whole thing. Also, I want this to be reliable, and sticking a 5v power supply, a microcontroller, and a relay in a box for three years seemed a little risky.

What I really needed was a “Time Delay Relay” which is a device that can get power, wait X number of seconds, and then power on another thing. There’s a whole bunch of them you can just buy! Time Delay Relays are not cheap though… This one is under $40, but you’ll probably also want the socket, which puts you closer to $50.

Luckily, Milwaukee Makerspace is filled with all sorts of old industrial “junk” and we have a bunch of these sitting on a shelf! Brant (you know, the guy who made an Auto-Off Timed Outlets from an old microwave control panel) helped me find one and get it wired up last week. It works great!

I used a $3 extension cord to provide an easy way to plug it into the first power strip and plug the second power strip into it. There’s a dial that lets you set the delay up to 10 seconds, which is more than enough for my needs.

If I’ve learned anything from this project it’s that even though you think you might have a good solution to a problem, it’s still worth asking others (at the space or on the mailing list) because you may get a better solution, and may even get the parts you need.

I’ve worked on it off and on for a few months, but finally decided to finish it this weekend.  On Saturday, I tweaked some dimensions and laser-cut the final enclosure.  I wasn’t happy with the button holes and text I had on the front of the first iteration, so I got rid of them for the final.  You can adjust the time by slipping a jeweler’s screwdriver or a paper clip through a gap in between the plexiglass sides and pressing the buttons to add hours or minutes. 

I added a small single-pole, double-throw toggle to switch between bright and dim, then soldered the connections before closing it up.  The whole thing is clamped together by a single #10-32 machine screw and a wingnut.  The final result doesn’t look half bad.

We made some good progress last time, but the repairs continue, and this time we got as far as a test drive!

We managed to finish the motor mount, get the chain on, repair the kill switch, and fix a wobbly wheel. We still need to get the new brakes in place, reattach the cooling fan, and see about some replacement wheels. But yes, it is running!

If all goes well we should have it ready by Minne-Faire on April 13th, 2013 in Minneapolis, Minnesota. (We decided not to drive it there, but instead will put it in the back of a regular old gasoline-powered vehicle, just so the batteries are fresh when we get there. :)

Check the video (which is a time lapse of the repairs) and you’ll see a few shots of driving it (note to self: take camera out of time lapse mode when driving!) There’s also a short bit of real-time video at the end showing a first-time guest driver taking it for a spin. (Literally!)

Tom and I spent some time this past weekend repairing Red Lotus, our #55 Power Wheels Car. Working with Tom is great because I end up learning a ton of new skills, like how to use an angle grinder, and the mill, and some welding tricks. These will all come in handy when the car breaks (and it will break) in the middle of a race.

Besides fixing up the car, we’ve also been building up the team, and it looks like at least two of us will try to make it to Minne-Faire in April for a bit of pre-season racing fun.

Here’s a quick time lapse video of Tom and I doing some repairs.

Did you know that we’ve got a number of members who have built electric cars? Ben Nelson even runs 300mph.org and has published DVDs and Instructables showing you how to build your own. (Sharing of knowledge is a top priority for our members!)

If you’re interested in electric cars, come on down to Milwaukee Makerspace at 1pm on Sunday, February 10th, 2013 for the first Milwaukee Electric Car Club Meeting at our new location. Got a Tesla, or a Volt, or some DIY/converted vehicle? Bring it! Just want to learn what these electric vehicles are all about? That’s cool too!

The Milwaukee Electric Car Club: Because gasoline is so 20th century.

The project I was working on involved using landscaping lighting, and right there on the “Hack Rack” were some old computer power supplies. Hmmm. We also happened to be talking about Zombie movies and TV shows, when it all clicked – I have the skills and materials to build an electric lantern from scratch using just the materials that are right here!

The project started by taking apart a computer power supply. I snipped the wires from switch and power cord connection close to the circuit board, so that I would have plenty of wire still soldered to the switch. After removing the circuit board and cooling fan, I had a nice empty box to use as the case for the lantern.

Next, I snipped out the fan grate, to allow for the 12V 11watt landscaping light bulb. These things are designed to run on 12AC from a transformer, but nothing is stopping me from running it on a 12V battery instead!

I crimped on a couple of spade connectors onto the wires from the switch to go to the battery and the bulb. I also wired the power port so that it was unswitched (always connects to the battery) that way, I could use it to recharge the battery without having to open the case. I would just clip the external battery charger that I already had to the two pins of the port.

Once the wiring was done, I checked the connections, turned it on and off a couple of time, and then glued the bulb in place with silicon.

A key feature of a lantern (as opposed to a flashlight) is that it has a distinct handle on the top, which the lantern hangs from. When I’ve made handles before, I’ve usually used a pair of bolts with spacers and some sort of cross-piece of wood or metal. However, I didn’t have anything like that handy, and it didn’t seem to fit the theme of the lantern either.

I DID have all the extra wiring from inside the power supply. The main bit of it was already bundled and had a nice connector on the end. I drilled two 1/2″ holes in the case cover and ran the cable through it, then back through the other hole, and pinned it in place with a few zip-ties.

I also glued two bits of foam on the inside of the case to cushion and help hold in place the battery. With that I put the cover back on and reinstalled the four cover screws.

There ya go! A lantern made completely from repurposed, recycled, and salvaged materials! Whether you like tinkering, being ready for the zombies, or just like being prepared, the Hack-A-Lantern is for you. Why don’t you try making one and see what you come up with!

More DIY Eco-Projects at http://ecoprojecteer.net