Milwaukee Makerspace – Milwaukee Makerspace https://milwaukeemakerspace.org Conceive, Collaborate, Create Fri, 29 Sep 2017 16:33:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 Fun in the Booth at the Milwaukee Maker Faire https://milwaukeemakerspace.org/2017/09/fun-in-the-booth-at-the-milwaukee-maker-faire/ https://milwaukeemakerspace.org/2017/09/fun-in-the-booth-at-the-milwaukee-maker-faire/#respond Fri, 29 Sep 2017 14:44:29 +0000 http://milwaukeemakerspace.org/?p=9595 Last minute decisions work out once in a while.  For example, I was going to be at the Makerspace booth at the Milwaukee Maker Faire for the weekend and wanted some examples of the sorts of things you can use a 3D printer to make, so I grabbed the usual collection of sample prints, and then I thought, “sure, why not?”, and loaded the Van de Graaff generator into the car.  It sat on the floor in the booth for about 1/2 of Saturday and I was getting a little bored, so I moved it closer to the foot traffic and plugged it in.  Wow!  Kids and adults with stunted emotional development went nutz!  They were zapping themselves and each other as if it were more fun than painful.

Sparks!

Sparks!  The VDG produces about 400 kV.

Then I found a plastic bucket and the fun really started.  We had kids and many adults who were definitely much too heavy, standing on the bucket and making their hair stand up with moms, dads, boyfriends, girlfriends, husbands, wives, partners all taking pictures.   I had to move one gentleman who was breathing oxygen from a tank away from the machine.  Fortunately, no one fell off the bucket or caught on fire, and next year we’ll do it right and take a block of styrofoam for people to fall off of  to stand on.

Kylee was ready to join the Makerspace just for this… and with that shirt, she’d fit right in!

 

Blondes really do have more fun!

Blondes really do have more fun!

Even Gordon couldn't resist!

Even Gordon couldn’t resist!

 

Last year Son of MegaMax (a 3D printer built at the Milwaukee Makerspace) went to the Faire.  This year he had two companions to keep him company- an extra-beefy printer being built by Erich Zeimantz: MiniMax XY.  MMXY isn’t complete yet, but promises to be a super high quality, high speed printer.  He’ll be operational at next year’s Maker Faire.  SoM also brought his big brother, Ultra MegaMax Dominator, named that because he is ultra, mega, maximum, and he dominates.

MiniMax XY at Milwaukee Maker Faire

MiniMax XY at Milwaukee Maker Faire

 

Ultra MegaMax Dominator and Son of MegaMax at the Milwaukee Maker Faire

Ultra MegaMax Dominator and Son of MegaMax at the Milwaukee Maker Faire

UMMD and SoM rotated between the booth and the dark room where the both printers’ UV lighting and fluorescent filament was a big hit.

UMMD in the Dark Room at Milwaukee Maker Faire 2017

UMMD in the Dark Room at Milwaukee Maker Faire 2017

We had a few things besides 3D printers at the booth.  Tony brought in some Bismuth crystals to give away, and surprisingly, they didn’t all disappear in the first hour.  Tony thinks people left them because the Makerspace logo on the info board on which the crystals were sitting looked a lot like the skull and crossbones that usually indicates poison.  The crystals do have an other-worldly toxic look about them.  Oh well…

Bismuth Crystal

Bismuth Crystal

Marcin’s LED signs on the table at the booth and hanging above the entrance to the Dark Room were also very popular and hard to miss, though I managed not to take any pictures of either.  The one above the Dark Room was so bright that if you saw it, you’ve probably still got its image burned into your retinas.

Everyone involved had a great time and we’ll be there again next year with even more cool stuff!

 

 

]]>
https://milwaukeemakerspace.org/2017/09/fun-in-the-booth-at-the-milwaukee-maker-faire/feed/ 0
Chocolate Printer Cooling System Test https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/ https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/#respond Sun, 22 Nov 2015 21:57:01 +0000 http://milwaukeemakerspace.org/?p=8717 This week I attempted the first test of the chocolate printer cooling system.  The cooling system is intended to solidify the chocolate just after it leaves the extruder nozzle so that by the time the next layer is started it will have a solid layer to sit on.  The cooling system consists of a centrifugal blower with a brushless DC motor blowing room air into a styrofoam cooler containing a block of dry ice.  The air passes over the dry ice and gets chilled as the dry ice sublimates directly into very cold CO2 gas.  The chilled air and CO2 mixture exit the box through a port with a hose that will ultimately blow the cold air on the chocolate.  At least, that’s how it is supposed to work.  It blows air at -12C as measured via a thermocouple, but unfortunately, the air exit port ices up in about 2 minutes and blocks the air flow.

There are many possible solutions.  I can add a heater to the exit port to prevent formation of ice, or dry the air going into the box using a dessicant cannister or maybe just use water ice instead of dry ice if the higher temperature will still cool the chocolate adequately.   Maybe using an old miniature freezer with an air hose coiled inside would do the job.  It would be really interesting if I could use the waste heat from a freezer to keep the chocolate liquified and flowing.  Back to the drawing board!

]]>
https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/feed/ 0
Experiments in optics and image processing https://milwaukeemakerspace.org/2015/06/experiments-in-optics-and-image-processing/ https://milwaukeemakerspace.org/2015/06/experiments-in-optics-and-image-processing/#respond Fri, 12 Jun 2015 19:55:44 +0000 http://milwaukeemakerspace.org/?p=8493 After successfully mating a web cam with my microscopes (http://www.thingiverse.com/thing:216821) and telescope (https://www.youmagine.com/designs/web-cam-adapter-for-meade-telescope-eyepiece), I decided to design and print adapters to mount my Droid Turbo phone on the same scopes (https://www.youmagine.com/designs/microscope-adapter-for-droid-turbo-phone and https://www.youmagine.com/designs/droid-turbo-phone-to-telescope-adapter) so I could shoot higher resolution stills (21 Mp) and 1080p (and even 4k) video.   The telescope adapter fits over a Meade 32mm focal length Super Plössl eyepiece and provides about 47X magnification with the telescope.  I printed a similar adapter for my surgical microscope.

IMG_0995_crop

 

 

 

 

 

 

 

 

 

 

 

 

The telescope adapter firmly grips the phone and the eyepiece.

 

IMG_0993_crop

 

 

 

 

 

 

 

 

 

 

 

 

Initial tests were a little disappointing.  The combination of the phone’s camera and the telescope’s optics has significant pincushion distortion.  The image has only been mirrored L-R and scaled down (original is 21 Mp).  Note the lack of contrast (looking through 1/2 mile of humid air) and the curves in the power line and pole, and even the grass line:

pinch test original

 

 

 

 

 

 

 

 

 

A quick search found that the Gimp has built in transform tools to correct (or create) lens distortion.

 

gimp

 

 

 

 

 

 

 

 

It only took a couple minutes of messing around to get acceptable results.  Here’s the same image with the pincushion distortion corrected (whole image), contrast stretched and white balance corrected (rectangular area).  The pole, power line, and even the grass line now look straight.

pinch test corrected

 

 

 

 

 

 

 

 

 

And here’s the final image with all corrections and cropping applied:

final

 

 

 

 

 

 

 

 

 

 

Next step: photograph known square grids through the microscope and telescope and then create and save some preset corrections to apply with Gimp.

I wonder if something like this exists for video.  Hmmmmm…

 

 

 

 

 

]]>
https://milwaukeemakerspace.org/2015/06/experiments-in-optics-and-image-processing/feed/ 0
Son of MegaMax Enters Instructables 3D Printing Contest https://milwaukeemakerspace.org/2015/05/son-of-megamax-enters-instructables-3d-printing-contest/ https://milwaukeemakerspace.org/2015/05/son-of-megamax-enters-instructables-3d-printing-contest/#respond Fri, 29 May 2015 16:38:32 +0000 http://milwaukeemakerspace.org/?p=8486 Many 3D printers being given away as prizes!  If I win one I’ll be donating it to my son’s school or other school or library that would like a machine and doesn’t already have one.  To do that I need your votes!

Son of MegaMax

Son of MegaMax

Please see my Instructable here:  http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/and vote for me by clicking the little red “vote” ribbon in the upper right corner of the start page.

Thanks!

http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/

]]>
https://milwaukeemakerspace.org/2015/05/son-of-megamax-enters-instructables-3d-printing-contest/feed/ 0
Update on the Never-Ending Printer Project https://milwaukeemakerspace.org/2014/12/update-on-the-never-ending-printer-project/ https://milwaukeemakerspace.org/2014/12/update-on-the-never-ending-printer-project/#respond Sun, 14 Dec 2014 18:58:12 +0000 http://milwaukeemakerspace.org/?p=8082 I installed the Y-axis screw drive in MegaMax using the old NEMA-23 stepper motor.  A couple really good things came from this:

1) I can now adjust the bed leveling screws from the underside of the bed using thumbwheels instead of a screw driver.  I know, I know, everyone else in the world has been able to do this from day 1…

Thumb screw for leveling print bed.   Screw is threaded into teflon block.

Thumb screw for leveling print bed. Screw is threaded into teflon block.

 

 

 

 

 

 

 

 

 

2) Unlike everyone else in the world, with fully supported linear guide rails, the print bed does not move in any direction but along the Y axis.  In the old scheme, with the end-supported round guide rails, the rails would flex and the bed would move up and down when applying pressure to it (sometimes even the screw driver pressure to adjust the bed leveling screws).  Now, if the bed moves at all in the vertical direction it’s because the bed plate (1/4″ aluminum) itself is flexing!

A couple bad things were also discovered:

1) The vibration and noise problem I was hoping to solve has not been solved.  It has been made worse, though the character of the noise is improved to musical tones instead of just harsh buzzing and rattling.

2) Several failed test prints at ever decreasing jerk, acceleration, and speed settings have demonstrated that the old motor simply doesn’t have enough torque to drive the screw reliably at reasonable printing speeds.

Shift occurred in Y-axis due to insufficient motor torque.

Shift occurred in Y-axis due to insufficient motor torque.

 

 

 

 

 

 

 

 

 

 

 

 

Further research into the first problem indicates that the vibration and noise are inherent in using steppers, and worse in MegaMax than in machines that use NEMA-17 motors because of the higher detent torque in the NEMA-23 size motors.  Detent torque is the little bump-bump you feel when you turn the motor shaft by hand.  The solution to the problem is to use a good driver for the motor and a higher voltage power supply.  The little A4988 chips in the Pololu drivers on the RAMPS board are very unintelligent- all they do is provide microstepping.  They work OK for NEMA-17 size motors because of the speeds and low detent torques in those motors.  When used with NEMA-23 motors the driver limitations become apparent – as they have in MegaMax- lots of noise and vibration.

Good stepper drivers are DSP based and automatically sense resonance and damp it electronically.  They use phase controlled sine wave currents to drive the motors smoothly.  Fortunately, DSP stepper drivers for NEMA-23 size motors are pretty cheap.   Here’s video of the DM542a driver pushing a NEMA-23 motor around.  I have ordered a DM542a driver.

The best power supply for stepper drivers is not a switcher, and running steppers from a switching supply will often result in a dead power supply.  I will be building a simple, unregulated transformer, rectifier, and filter cap supply to go with the new driver.

Next came the question of how to determine how much torque is needed to properly drive the Y-axis.  A bit of research took me here: Motor size calculator.  You just select the scheme for which you want to size the motor, enter the appropriate data, and it magically tells you how much torque you need to do the job.  When I ran the numbers on MegaMax, it told me that I need about 350 oz-in of torque (about double the torque of the motor I have).  I did a quick search and found a Chinese made (of course) 425 oz-in motor for $50.  Also on order…

The motor mount I am using is designed for a NEMA-34 size motor with which I use an adapter plate to allow the NEMA-23 motor to fit.  Since I’m buying a new motor anyway, why not just get a NEMA-34 motor?  It turns out that the best stepper for the job is generally the smallest motor that can provide the necessary torque.  A NEMA-34 motor could provide much more torque but the detent torque and rotor inertia would work against smooth and fast operation, and require a bigger power supply.

Back side of MegaMax showing motor mount, adapter plate, flexible coupler, and drive screw  in Y-axis.

Back side of MegaMax showing motor mount, adapter plate, flexible coupler, and drive screw in Y-axis.

 

 

 

 

 

 

 

 

 

 

 

The ATmega2560 and RAMPS boards will be replaced by a SmoothieBoard.  It has a much faster processor, much better connections for motors/external drivers, etc.  It currently lacks an easy way to add an LCD controller, so I may have to connect to a computer to start prints up (it has ethernet and a built in web server so it can be accessed from any computer on the network).  When a clean way to add an LCD controller becomes available, I’ll add it.  SmoothieBoard review

 

]]>
https://milwaukeemakerspace.org/2014/12/update-on-the-never-ending-printer-project/feed/ 0