tested – Milwaukee Makerspace https://milwaukeemakerspace.org Conceive, Collaborate, Create Sun, 22 Nov 2015 21:57:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 Chocolate Printer Cooling System Test https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/ https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/#respond Sun, 22 Nov 2015 21:57:01 +0000 http://milwaukeemakerspace.org/?p=8717 This week I attempted the first test of the chocolate printer cooling system.  The cooling system is intended to solidify the chocolate just after it leaves the extruder nozzle so that by the time the next layer is started it will have a solid layer to sit on.  The cooling system consists of a centrifugal blower with a brushless DC motor blowing room air into a styrofoam cooler containing a block of dry ice.  The air passes over the dry ice and gets chilled as the dry ice sublimates directly into very cold CO2 gas.  The chilled air and CO2 mixture exit the box through a port with a hose that will ultimately blow the cold air on the chocolate.  At least, that’s how it is supposed to work.  It blows air at -12C as measured via a thermocouple, but unfortunately, the air exit port ices up in about 2 minutes and blocks the air flow.

There are many possible solutions.  I can add a heater to the exit port to prevent formation of ice, or dry the air going into the box using a dessicant cannister or maybe just use water ice instead of dry ice if the higher temperature will still cool the chocolate adequately.   Maybe using an old miniature freezer with an air hose coiled inside would do the job.  It would be really interesting if I could use the waste heat from a freezer to keep the chocolate liquified and flowing.  Back to the drawing board!

]]>
https://milwaukeemakerspace.org/2015/11/chocolate-printer-cooling-system-test/feed/ 0
Spaceship Chair Tested By Space-Man! https://milwaukeemakerspace.org/2011/06/spaceship-chair-tested-by-space-man/ https://milwaukeemakerspace.org/2011/06/spaceship-chair-tested-by-space-man/#respond Thu, 16 Jun 2011 19:29:20 +0000 http://mm.bytedev.info/?p=697 *Extra! Extra!*

Dateline: June 14, 2011, Milwaukee Makerspace

Ron Bean recently wowed the world & the Milwaukee Makerspace with his new invention, the “Spaceship Chair”. Now everyone is wowed again now that an actual real life Space-Man has come down from the cosmos to test the chair. No word on what galaxy he was from, but he was quoted as saying, “This chair is out of this world!”

We have this one verified image of the Space Man enjoying the comfort of Ron’s Spaceship Chair!

Congratulations to Ron for bridging the intergalactic boundaries with his universally adored chair!

For more information please check back here at www.milwaukeemakerspace.org !

For Milwaukee Makerspace news, I’m David R.

]]>
https://milwaukeemakerspace.org/2011/06/spaceship-chair-tested-by-space-man/feed/ 0