sign – Milwaukee Makerspace https://milwaukeemakerspace.org Conceive, Collaborate, Create Fri, 13 Dec 2013 21:07:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 Light it UP! https://milwaukeemakerspace.org/2013/12/light-it-up/ https://milwaukeemakerspace.org/2013/12/light-it-up/#respond Fri, 13 Dec 2013 19:27:25 +0000 http://milwaukeemakerspace.org/?p=6782 Sign

I noticed a serious lack of light-up signs with our logo in the 3D Printing Lab, so I rectified that situation.

I took an old IKEA “Skugga” lamp and replaced your favorite coffee with a fresh new Milwaukee Makerspace logo.

If you want all the gory details (actually, I left out the bloody part) check out my blog post It’s a sign! for more info.

Sign

(Note: MakerBot Replicator 1 not included.)

]]> https://milwaukeemakerspace.org/2013/12/light-it-up/feed/ 0 Lighting Control Upgrade! https://milwaukeemakerspace.org/2013/11/lighting-control-upgrade/ https://milwaukeemakerspace.org/2013/11/lighting-control-upgrade/#comments Sun, 17 Nov 2013 14:53:05 +0000 http://milwaukeemakerspace.org/?p=6628 IMAG3517In an effort to make the lighting control system more user-friendly, the original board-mounted switches have been replaced with a laser-cut zone map! Instead of looking up which zone number corresponds to a particular bank of lights, each location is now identified by a green LED pushbutton.  You can read more about the lighting control system and how it’s been evolving on our wiki: http://wiki.milwaukeemakerspace.org/projects/mmlc

]]> https://milwaukeemakerspace.org/2013/11/lighting-control-upgrade/feed/ 5 Staying Stocked Up https://milwaukeemakerspace.org/2013/05/staying-stocked-up/ https://milwaukeemakerspace.org/2013/05/staying-stocked-up/#comments Sun, 19 May 2013 13:51:55 +0000 http://milwaukeemakerspace.org/?p=5653 The idea was simple: make something to help keep track of our supplies so we know when we’re running low on the essentials.  After weeks of kicking the idea around and various rough doodles, this project finally took shape.  Two days after the first cut on the laser cutter, it was complete.


Made from multiple layers of acrylic, cardboard, and wood, the “Milwaukee Makerspace Consumables Super Analog Status Board” is a clipboard-sized device with nine sliders installed in enclosed slots.  Sliding the tabs right displays more green to indicate “full” or “lots” and sliding left reveals the red acrylic below to indicate “empty” or “low.”  The user can carry the board around the Space with them as they check on supplies and when done, a large hole centered at the top allows the board to be hung up and displayed on a wall.

The hardware holding the whole thing together can be loosened and the layers disassembled.  The cardboard insert that the text resides on can be swapped out should we decide to change the list of items we want to keep tabs on.  The supplies being tracked currently include:

  • Toilet Paper
  • Paper Towels
  • Hand Soap
  • Welding Gases
  • Welding Wire
  • Propane
  • Soda
  • Duct Tape
  • Painter’s Tape

A digital version may or may not be planned for future release.

]]> https://milwaukeemakerspace.org/2013/05/staying-stocked-up/feed/ 4 Ho Ho Lights https://milwaukeemakerspace.org/2012/12/ho-ho-lights/ https://milwaukeemakerspace.org/2012/12/ho-ho-lights/#comments Sat, 01 Dec 2012 22:00:45 +0000 http://milwaukeemakerspace.org/?p=4689 My Husband and I wanted to put up some kind of Christmas decorations in our apartment windows over looking the city. After talking about it for a while, I decided to make lighted letters saying, “HO HO HO” …but since we only have two pairs of windows, it would have to just be, “HO HO”.

In the wee hours on Black Friday, we got the materials: 4 sheets of wood, 4 boxes of 100 count LED lights, and extension cords. After sketching out the design…

…and cutting out the letters…

…it was time to drill the 400 holes and hot glue all the lights in place.

It only took a weekend to make and hang these and I think the end result is well worth it.

MAHRER CHRERSTMAHS

]]> https://milwaukeemakerspace.org/2012/12/ho-ho-lights/feed/ 3 Metal Signage https://milwaukeemakerspace.org/2012/07/metal-signage/ https://milwaukeemakerspace.org/2012/07/metal-signage/#comments Thu, 12 Jul 2012 10:00:57 +0000 http://milwaukeemakerspace.org/?p=3850 Milwaukee Makerspace

One of our members, who I’ll refer to as a “Master of Metal” made this fully-functional sign for one of our doors. Never again will someone attempt to enter said door without knowing who (and what) lies on the other side.

And when I say this sign is “fully-functional” I mean it is fully-functional. Enough said.

]]> https://milwaukeemakerspace.org/2012/07/metal-signage/feed/ 2 The “wife is right” sign https://milwaukeemakerspace.org/2011/12/the-wife-is-right-sign/ https://milwaukeemakerspace.org/2011/12/the-wife-is-right-sign/#respond Wed, 28 Dec 2011 12:00:02 +0000 http://milwaukeemakerspace.org/?p=2644 Dana is right.

For Christmas I made my lovely wife this lovely sign that lets me (and everyone else in the room) know that she is right.

She can easily point at it to end any disagreement we may be having.

I think I’m going to call it the “wife is right” sign, and I’ll be taking orders from wives to make them signs soon. I’ll also be taking orders from husbands to prevent me from taking orders from their wives. Either way, I see it as a great business opportunity.

In all honesty, the sign comes from a joke my wife and I had a few months back. When we got the laser cutter at the space, this was one of the first things I made with it.

]]> https://milwaukeemakerspace.org/2011/12/the-wife-is-right-sign/feed/ 0