printmaking – Milwaukee Makerspace https://milwaukeemakerspace.org Conceive, Collaborate, Create Tue, 26 Nov 2013 16:12:43 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 Woodblock Prints https://milwaukeemakerspace.org/2013/10/woodblock-prints/ https://milwaukeemakerspace.org/2013/10/woodblock-prints/#respond Fri, 25 Oct 2013 02:06:10 +0000 http://milwaukeemakerspace.org/?p=6550 Occasionally back in the day,  I would breakout the linoleum blocks and the speedball cutting tools, and carve out a design to make block prints.  My experience in making prints spans from potato carvings to cardboard stencils, linoleum and wood blocks.  As designs became larger, complex, and multi-color, the time it would take to carve the block plates, made finishing a project difficult at best.

Then, the laser cutter…..

Using the adobe suite of products I created two black and white drawings to be translated to wood blocks.

rooster_redPlate rooster_BlackPlate

Unlike traditional transfer/carving methods, I decided to utilize the 60W laser to etch the images into poplar wood vs. carving.  I chose poplar for its hardness and ability not to warp as easy as pine or other softer woods.  60W laser setting was 100 power, 60%speed, 500 PPI

The image below is a 5″x7″ laser cut of the black plate of the rooster image.

image

Top-Left is the black plate for the left facing rooster.  Bottom-left is the red plate for the left facing, top-right – red plate, bottom right – black plate

image (1)

The following image shows the red left-facing plate printed, and the black plate inked up and ready to be printed

image (2)

The first red/black rooster print, along side the right facing black print.

image (3) image (5)

And of course, if you do one, you have to do many.

Multiprint

]]>
https://milwaukeemakerspace.org/2013/10/woodblock-prints/feed/ 0
Plate & Print https://milwaukeemakerspace.org/2012/07/plate-print/ https://milwaukeemakerspace.org/2012/07/plate-print/#comments Tue, 17 Jul 2012 13:23:56 +0000 http://milwaukeemakerspace.org/?p=3907 Plate & Print

Remember my post about making printing plates? I finally got a chance to try it out.

I took a sheet of 3mm Baltic Birch plywood and etched it with the 25 watt laser cutter. My design was about 5 inches wide by 6 1/2 inches tall and took about 90 minutes to complete. I etched it at 100% speed / 60% power. (Shane’s etching chart was quite helpful.)

Once the plate was done I had to head out, so I didn’t get to use the press we have, so I ended up just doing a quick test at home and hand burnishing the print, so it doesn’t exactly look great… but this was just a test. Rolling the ink onto the plate worked well, the etching was deep enough to keep the ink out.

I look forward to the next step in this process, trying this print in the real press and seeing how it turns out. I’m also still learning about the sort of paper I should use. The stuff I have now is “fine” and a bit thin. I did get some advice from jason g. who said “Two words: Rives BFK” and that’s all he had to say about that. :)

Oh, and I almost forgot to reverse my artwork before I etched it! Not good… As for the robot, it’s one I drew last year.

]]>
https://milwaukeemakerspace.org/2012/07/plate-print/feed/ 1
Printmaking Plates https://milwaukeemakerspace.org/2012/07/printmaking-plates/ https://milwaukeemakerspace.org/2012/07/printmaking-plates/#comments Thu, 05 Jul 2012 11:00:00 +0000 http://milwaukeemakerspace.org/?p=3815 Making Plates

One of the things I’d like to try at the Makerspace is printmaking, and since Brent brought in a press, and I’ve got some ink and nice paper, the next thing I need is a plate.

You can use a variety of materials to make the plates, but I’m interested in using wood, and as you can see from the photo above, one option is to use a CNC Router to do the plate. (The one in the photo is at UWM and features one of Frankie’s pizza cutters.) I’m going to first try the laser cutter for making a plate. I’ve got some half-toned artwork which I’ll do a raster etch with, and see how that goes.

If this works (and I’m sure it will, right?) we should be able to make plates that are 12″x24″ on the laser cutter, or 24″x32.5″ on the CNC Router. For anything larger than the press we’ve got we’ll need to make the print by hand, which I’ve seen done, but haven’t tried yet myself.

If anyone has experience with any of this, or wants to work on it together, let me know!

]]>
https://milwaukeemakerspace.org/2012/07/printmaking-plates/feed/ 3